Furuno FELCOM18 Operator'S Manual Download Page 25

Page: 25 / 143

2. OPERATIONAL OVERVIEW

2-9

Successful Login.

: Login was successful.

Login failed.

: Login failed.

Successful Logout

: Logout was successful.

Logout failed.

: Logout failed.

Successful Forced Clearing.

: Forced clearing successful.

Forced Clearing Failed.

: Forced clearing unsuccessful.

SENDING MESSAGE PACKETS

: Sending TX message packets.

WAITING FOR ACKNOWLEDGEMENT

: Waiting for acknowledgement from LES.

Successful sending to LES.

: Message successfully sent to LES.

Sending message failed.

: Message could not be sent to LES.

Call rejected.

: LES rejected your message.

Call pending.

: LES temporarily suspending communications.

Received Call.

: Call received from LES.

Received Call(ITA2).

: Call(ITA2) received from LES.

RECEIVING MESSAGE PACKETS

: Receiving message packets.

CLEARING

: Clearing TX sequence.

Successful receiving

.: You successfully received message.

Receiving failed.

: You could not receive message.

Successful Data Report.

: Data report successfully sent.

Data Report failure.

: Data report could not be sent.

PV TEST CALL is rejected.

: PV test call rejected by NCS.

PV TEST CALL is pending.

: PV test call pending by LES.

TEST-RECEIVING MESSAGE

: Receiving test message from LES.

TEST-SENDING MESSAGE

: Sending test message to LES.

WAITING FOR ACTIVATION

: Waiting start of PV test.

WAITING FOR TEST RESULT

: Waiting for results of PV test.

CLEARING

: Clearing PV test.

PV TEST is Completed.

: PV test is completed.

PV TEST Failure.

: PV test failed.

(3b) COMMCPU program version number

DCE F19 Ver. XX

: (XX = Version Number).

Trouble messages also appear here. See section 8.7.1.

(4) Frame synchronization

Blank

: Changing channel, or during transmission.

SYNC (NCS)

: Synchronizing with NCS.

SYNC (LES)

: Synchronizing with LES.

MES Sig. Ch

: Changing MES signaling channel.

MES Msg. Ch

: Changing MES message channel.

UNSYNC

: Out of synchronization.

Retuning

: Synchronizing with NCS or LES.

(5) Ocean region currently being received

No display

: Out of synch with satellite.

AOR-W

: Atlantic Ocean Region-West.

AOR-E

: Atlantic Ocean Region-East.

IOR

: Indian Ocean Region.

POR

: Pacific Ocean Region.

Summary of Contents for FELCOM18
















































































































































Search results

Summary of Contents for FELCOM18

Reviews:

Related manuals for FELCOM18

Brands by name

Popular brands

Furuno FELCOM18, Operator'S Manual

Search results

Summary of Contents for FELCOM18

Reviews:

Related manuals for FELCOM18

Brands by name

Popular brands