Furuno FELCOM 70, Operator'S Manual

Page: 47 / 216

4. OPERATION FROM PC
4-9
4.5 Traffic log settings
(owner level only, see " Shifting to owner level " on page 5-4.)
1
In the Main window, clicking
Log
opens the Traffic log window, which
displays the current log mode, number of unprinted calls, and whether
logging of incoming calls is enabled/disabled.
Point to
Logging mode
, click
Edit
or to choose mode of operation:
•
Paused:
any logging is off.
•
Cleared:
all log entries are deleted (incoming and outgoing).
•
Enabled:
outgoing logging is on.
Scroll / to wanted mode, and click to select.
•
Scroll down to
Log incoming calls
and click
Edit
or to enable or
disable logging of incoming calls.
Circuit switched calls:
2
Clicking
Cct
in the Traffic log (window
1
shown in the figure below) opens the
list of all call records except MPDS calls.
Print
outputs all unprinted calls (marked with a star):
•
Clicking
Tag*
marks
all
calls with a hash, which adds the records to the
printout file.
•
Clicking
Tag
marks the
selected
call with a hash, which adds the record to
the printout file.
•
Clicking
Tag
again untags a selected record.
3
Pressing at a record when in window (
2
) displays detailed call data.
#
Tagged for printout
*
Call not yet printed
Hours:minutes:seconds
1
2
3