Furuno FAR-3230S-BB, Installation Manual

Page: 41 / 139

2. WIRING
2-13
IPX2 kit
The optional IPX2 kit (Type: OP24-23, Code No.: 001-171-780) protects the connec-
tors shown below to waterproofing standard IPX2.
Contents of IPX2 kit
1. Set the connector gasket to the unused connector not used.
2. Fasten two binding screws to fix the connector gasket.
3. Peel the paper from the double-sided tape on the rainproof cover, then attach the
cover to the position shown below by using four screws pre-attached to the pro-
cessor unit.
Name Type Code No. Qty Remarks
Binding Screw #4-40UNCX3/16 000-176-619-10 10
Connector Gasket 1 24-014-0107 100-367-730-10 2 For D-sub connectors
Connector Gasket 2 24-014-0108 100-367-741-10 3 For DVI connectors
Rainproof Cover 24-014-0109 100-372-202-10 1
Gasket Clamping Plate 24-014-0114 100-372-210-10 2 For D-sub connectors
24-014-0115 100-372-220-10 3 For DVI connectors
1 WHT/GRN
2 GRN
3 WHT/ORG
4 BLU
5 WHT/BLE
6 ORG
7 WHT/BRN
8 BRN WHT/ORG 1
ORG 2
WHT/GRN 3
BLU 4
WHT/BLE 5
GRN 6
WHT/BRN 7
BRN 8
1 WHT/ORG
2 ORG
3 WHT/GRN
4 BLU
5 WHT/BLE
6 GRN
7 WHT/BRN
8 BRN WHT/ORG 1
ORG 2
WHT/GRN 3
BLU 4
WHT/BLE 5
GRN 6
WHT/BRN 7
BRN 8
[Cross cable] [Straight cable]
Connector gasket
Gasket clamping plate
Screws to fix the rainproof cover
Rainproof cover
Processor unit Processor unit