Furuno DRS6A-NXT, Installation Manual

Page: 14 / 40

1. INSTALLATION AND WIRING
7
4. Apply marine sealant to the thread holes on the bottom of the radiator (4 loca-
tions).
5. Prepare four bolt assemblies; pass the spring washer (M8) and flat washer (M8)
through the each hex bolt (M8

30) then apply marine sealant.
6. Fasten the radiator to the radiator bracket, using the four bolt assemblies pre-
pared at step 5.
Note: Be sure to align the waveguide location between the radiator and radiator
bracket before fastening bolt assemblies.
Bottom view: Radiator
Marine sealant
Flat washer
Spring washer
Hex. bolt
Marine sealant
Hex. bolt
(4 pcs)
Align the waveguide
location.
Detailed view (after securing the radiator)