Furuno CSH-83 Operator'S Manual Download

Page: 71 / 110

7-15

Plotting Net Location Mark

Before shooting net, you will decide the shoot timing consider-
ing the water current direction, distance to fish school and mov-
ing direction of the fish school. Use the net location mark as a
guide to decide the timing.

This function requires speed and heading inputs.

1. Place the trackball mark on fish school to be caught.

2. Press the NET COURSE key. The net location mark is de-

picted by dotted ring with a diameter equivalent to that of
your purse seine net, being centered on the trackball mark.

Trackball
mark

Net location
mark

Figure 7-13 Net location mark

3. To adjust the location of net location mark, move the trackball

mark.

4. When the location is finalized, press the NET COURSE key

again. The dotted ring is replaced by solid ring and the lamp
above the NET COURSE key lights.

5. To erase the mark, press the NET COURSE key again.

You can adjust the diameter of the net location mark on NET
SHOOT PLAN in the DATA SET menu.

Summary of Contents for CSH-83















































































































Search results

Summary of Contents for CSH-83

Reviews:

Related manuals for CSH-83

Brands by name

Popular brands

Furuno CSH-83, Operator'S Manual

Search results

Summary of Contents for CSH-83

Reviews:

Related manuals for CSH-83

Brands by name

Popular brands