Furuno CI-35, Installation Manual

Page: 43 / 99

3-5
3.4 Junction Box
The transducer cable is connected to the junction box with an extension cable. After
making the connection, seal the cable gland with putty for watertightness.
1) Transducer cable 66S1066 (without armor)
Vinyl Sheath
Cut to suitable length considering location on terminal board.
FV1.25-4
FV2-P4
Vinyl Tubing
FV5.5 (YEL)
Vinyl Tape
To internal earth stud
Vinyl Tape
Grand
Rubber Packing
See Interconnection
Diagram
Fig. 3-7
2) 4 pair cable 66S1067 (extension cable, with armor)
Attach crimp-on lugs in the same manner as shown above. Fabricate the armor as
follows
.
Anticorrosive
Sheath
Solder
vinyl wire.
To earth terminal
(wing nut)
Gland
Rubber gasket
Armor
Clamp vinyl sheath
by cable gland.
Fig. 3-8
www.reelschematic.com
www.reelschematic.com