Furuno CI-35, Installation Manual

Page: 38 / 99

2-10
5. Unpack the transducer in the ship’s bottom.
6. Dismount the fixing flanges from the casings, and then fix the transducers to
flanges appropriately.
Referring to the stickers on the vinyl packing of transducer or beam No. on transducer
cable, mount the transducers as below.
Transducers
Fixing palte
Fig.2-13 Mounting transducers on flanges
Bow
Nipple of transducer should be met
to notch of fixing flange.
Transducer casing, bottom view
Beam No.
Nipple
Direction of main beam
Fig. 2-14 Transducer casing, bottom view and beam direction
7. Pass the transducer cable through the thru-hull pipe. Tighten the cable gland,
leaving a cable slack of 0.5 to 1 m below the cable gland.
8.
Mount fixing flange with the transducer onto the casing. Take care not to pinch the
transducer cable. Never hold the transducer by the cable. Shock will most assuredly
damage the transducer.
www.reelschematic.com
www.reelschematic.com