Furuno CHS-5LMARK-2-55 Operator'S Manual Download

Page: 52 / 90

4. ECHOSOUNDER MODE

4-4

4.5

Suppressing Interference

Interference from other sounders or electrical interference shows itself on the screen
as in the illustration below.

Interference

To remove interference, do the following:

1. Press the

MENU

key to open the menu.

2. Use the

RANGE

control to choose [MENU MODE] at the top of the screen.

3. Use the

GAIN

control to choose [SOUNDER].

4. Use the

RANGE

control to choose [E/S INT REJECT].

5. Use the

GAIN

control to choose [ON]. (If no interference exists, choose [OFF].)

6. Press the

MENU

key to close the menu.

4.6

Suppressing Low Level Noise

Low level noise, often caused by sediments in water, is painted on the screen as a
large number of light-blue dots. These echoes may be suppressed as below.

Clutter

1. Press the

MENU

key to open the menu.

2. Use the

RANGE

control to choose [MENU MODE] at the top of the screen.

3. Use the

GAIN

control to choose [SOUNDER].

4. Use the

RANGE

control to choose [CLUTTER].

5. Use the

GAIN

control to choose setting. (The setting range is 0.0-10.0 and the

higher the number the stronger the echo that will be erased.)

6. Press the

MENU

key to close the menu.

Interference from
other sounders

Inteference from
electrical equipment

Summary of Contents for CHS-5LMARK-2-55



























































































Search results

Summary of Contents for CHS-5LMARK-2-55

Reviews:

Related manuals for CHS-5LMARK-2-55

Brands by name

Popular brands

Furuno CHS-5LMARK-2-55, Operator'S Manual

Search results

Summary of Contents for CHS-5LMARK-2-55

Reviews:

Related manuals for CHS-5LMARK-2-55

Brands by name

Popular brands