Furuno CH-500, Installation Manual

Page: 19 / 129

1. MOUNTING
1-9
2. Secure the control fixing fixture to the control unit, using two hex. head slot bolts
(M4
u
12).
3. Connect the cables to the unit, referring section 2.3.
4. Set the unit to the mounting hole, then secure the unit with four self-tapping
screws (
I
5
u
20).
1.5 Transceiver Unit
Mount the transceiver unit on a bulkhead.
Mounting consideration
Select a mounting location, keeping in mind the following points:
• Keep the display unit out of direct sunlight.
• Locate the unit away from places subject to water splash and rain.
• Locate the unit away from exhaust pipes and ventilators.
• The mounting location should be well ventilated.
• Select a location where shock and vibration are minimal.
• Referring to the outline drawings at the back of this manual, allow sufficient space
for maintenance and service.
• Select a mounting location considering the length of the cables to be connected to
the unit.
Hex. head slot bolt
(M4×12, 2 pcs)
Control fixing
fixture
Self-tapping screw
(Ø5×20, 4 pcs)