Furuno CH-500, Installation Manual

Page: 11 / 129

1-1
1. MOUNTING
1.1 Required Tools and Materials
Prepare the following tools in advance for this installation.
No. Name Qty Specification/Remarks
1
Phillips-head
Screwdriver
- #1 for M3 and #2 for M4/M5
2 Wrench -
For M4 (hex. size 7 mm), M8 (hex. size 13 mm), M10 (hex. size
17 mm), M16 (hex. size 24 mm, for CH-5046), M20 (hex. size 30
mm, for CH-5048)
3 Adjustable Wrench - Hex. size 35 mm and 41 mm
4 Pipe Wrench - Hex. size 55 mm
5
Ball Wrench*
1
- For M5 (hex. size 4 mm)
6 Ratchet Wrench 1 Hex. size 19 mm, for checking manual raise/lower of transducer
7 Hex Wrench 1
Hex. size 3 mm, only required for optional waterproofing attach-
ment kit (OP06-27)
8
Terminal Opener*
2
- For wiring WAGO connector
9 Power Cable
1 DPYCYSLA-2.5 cable, for hull unit
1 DPYCY-2.5 cable, for transceiver unit
10 Ground Wire 4 IV-2sq., for hull unit, transceiver unit, display unit, control unit
11 Crimp-on Lug 4 FV2-4, for ground wire
12 Vinyl Tape - For fabricating
13 Heat Shrinkable Tube - For drain wire of the DPYCYSLA-2.5 cable
14 Lithium Grease -
Recommended:
• Daphne Eponex Grease No.2 (IDEMITSU KOSAN CO.,LTD)
• Shell Albania Grease S No.2 (SHOWA SHELL SEKIYU K. K.)
• Mobilux EP No.2 (Exxon Mobil Corporation)
• Multinox Grease No.2 (Nippon Oil Corporation)
15
Liquid Gasket*
3
- TB1121 or TB1184 (ThreeBond Holdings Co., Ltd.)
16 Retaining Compound -
For optional waterproof attachment kit (OP06-27)
Recommended: LOCTITE 601 (Henkel.,LTD)
17 Extension Cable -
Used only when the raise/lower control unit is mounted separately
(not recommended).
Cable diameter:
I
7±0.5 mm
*
1
: Supplied with installation materials for the CH-5048. Not required for CH-5046.
*
2
: Pre-attached inside the raise/lower control unit.
*
3
: Liquid gasket may not be supplied with the product because of export restrictions
in each country. If not included, prepare specified liquid gasket locally.
NOTICE
Do not apply paint, anti-corrosive sealant or contact
spray to coating or plastic parts of the equipment.
Those items contain organic solvents that can damage
coating and plastic parts, especially plastic connectors.