Furuno 1824C-BB, Installation Manual

Page: 40 / 82

2-2
DJ-1
For MODEL1824C-BB/1834C-BB/1934C-BB/1944C-BB/1954C-BB, remove the
waterproofing cap from the DJ-1 port on the processor unit and discard it.
GD-1920C-BB: Do not remove the waterproofing cap. Wrap the connector nut and cap with
vinyl tape as shown below.
Connector nut (for 24P)
Waterproofing cap (yellow)
Vinyl tape
Waterproofing cap and connector nut, sectional view
DATA1 to DATA3
Other equipment can be connected to DATA1-DATA3 as shown below.
DATA1 (7P) DATA2 (6P) DATA3 (6P)
GPS receiver
GP-310B/320B NMEA sentence
(ex. navaid) Heading sensor (ex. SC-60/120)
(MODEL series only)
This equipment can receive the following NMEA 0183 format sentence from external
equipment. You will need the optional NMEA cable to connect with external equipment.
•
Own ship’s position: GGA>RMC>RMA>GLL
•
Time: ZDA>RMC
•
Ship’s speed: RMC>RMA>VTG>VHW
•
Other ship’s information: TTM
•
Wind speed and angle: MWV>VWT/VWR
•
Heading (True): HDT>HDG>HDM>VHW
•
Heading (Magnetic HDM>HDG>HDT>VHW
•
Course: RMC>RMA>VTG
•
Depth: DPT>DBT>DBS>DBK
•
Waypoint RMB>WPL>BWR>BWC
•
Water temperature: MTW
•
Target data TLL (output from VHF radiotelephone FM-2721)
•
DSC information DSC>DSE (output from VHF marine transceiver FM-3000)