2-2
6. Unfasten four screws shown in the figure
below.
J
ß
Four screws
Figure 2-4 Scanner unit chassis,
cover opened
7. Pass the signal cable through the cable
protector.
Cable
protector
Figure 2-5 Scanner unit chassis,
cover opened
8. Connect the signal cable to the RTB
Board (03P9249), referring to the inter-
connection diagram and the figure below.
Note that connector VH2P is not used.
Route cable along here.
Lead in
cable here.
J821 VH9P
J824 NH13P
J823 VH4P
Clamp
Figure 2-6 Scanner unit chassis,
cover opened
9. Fix the signal cable with the cable clamp.
10.Release the stay and close the cover.
Loosely fasten the cover fixing screws;
you will have to make some adjustments
inside after completion of wiring.
2.2 Display Unit Connections
unfasten to open
Socket Cap
Black
White
unfasten to open
Nav. Receiver NMEA0183 connector
Gyro Connector
Earth terminal
unfasten to open
(30m max.)
Scanner Unit
unfasten to open
Fuse 10A (12V)
5A (24/32V)
Figure 2-7 Display unit, wiring diagram
