8
6. Install the ATX assembly into the chassis, using the six pan head screws (M3×8).
7. Connect the connectors on the ATX assembly to CN15, CN4 and CN5 on the motherboard as-
sembly.
8. Secure the new SSD fixture assembly, using the four pan head screws (M3×8). If there is no
wiring clamp on the following location, attach a wiring clamp.
Note
: The old SSD (or HDD) cannot be diverted.
Pan head
screw(M3×8)
Pan head screw
(M3×8)
ATX assembly
Screw location:
Four screws
(outside the chassis)
Screw location:
Two screws
(inside the chassis)
Some parts or wiring
have been omitted from
the illustrations for
clarity.
CN15
CN4
CN5
SSD fixture assembly
Wiring clamp
50 mm
60 mm
