5
9. If the processor unit has the VC card*, unfasten the pan head screws (M3×6) to pull out the VC
card.
*: Depending on the time of manufacture, the VC card may be not installed.
10. Unfasten the pan head screws (M3×6) to pull out the old DVI connector board.
11. Remove the three connectors inside the chassis (indicated in the following figure), then unfasten
the pan head screws (M3×8) to remove the connector fixture plate assembly.
VC card
Pan head screw
(M3×6)
DVI connector board
Pan head screw
(M3×6)
Connector fixture plate assembly
Screw location:
Four screws
(outside the chassis)
Remove connectors.
