l
Move arrow keys to appropriate position, if the color changes, setting can work.
1
、
Date:
【
Enter
】
to select "every day" "Monday" "Tuesday" "Wednesday"
"Thursday" "Friday" "Saturday" "Sunday".
2
、
Type:
【
Enter
】
to select "Timer" "Alarm," "Mobile".
3
、
PERIOD 1: Use number keys to start and stop recording time.
4
、
PERIOD 2: Use number keys to start and stop recording time..
l
Packing time: It means the time length of each video file,
【
Enter
】
to select "5" "15"
"30" "60" minutes.
l
DVR code: It can be entered up to 11 numbers for each DVR.
l
Enter: Press [Enter] on remote control or "Apply" on the screen to save setting and
return to previous menu.
l
Exit: In the setup process, pressed remote control "Exit" button at any time, system
will not save setting and return to previous menu.
3.3.1.3 SD Card
Go to "System SET" with up and down arrow keys, then go to "SD Card" with left and right
arrow keys, then click on
【
Enter
】
, into the following interface:
l
Move arrow keys to appropriate position, if the color changes, setting can work.
l
OVER WRITE:
【
Enter
】
to select "Open" and "Close".
l
Open: When SD card is full, it will cycle recording. The oldest video file will be
covered by the latest video file.
l
Close: SD card stops recording after full.
l
"BLOCK DEVICE":
【
Enter
】
to select "SD1" "SD2" "U disk"
l
SD1
：
When put two SD cards at the same time, the video file is stored by SD1. If SD1
is fully, it is continues stored video by SD2. When two cards are full, it starts to cover
