15
Operation
Quick Reference Guide
General Operation
Power on/off, switch
to standby mode
Press to turn the unit on or enter standby mode.
Press and hold to turn the unit off.
Mute
Press
MUTE
to mute sound. The
icon flashes on the display.
Press
MUTE
again to restore the sound.
Select a source
Press
DISC/USB, AM/FM, AUX, BT
to select Disc (with a disc loaded), USB (with
a USB storage device connected), AM/FM, AUX, or BT.
Adjust volume
Rotate the
VOLUME -/+
knob
to adjust volume.
Select a feature /
setting
1. Press
SEL
EQ
once or more to select VOL, BAS (without EQ preset), TRE
(without EQ preset), BAL, LOUD ON/OFF, LOC ON/OFF, ST ON/OFF, BEEP ON/
OFF, SUB ON/OFF, or CLOCK.
2. Rotate the
VOLUME -/+
knob
to select a feature / setting.
Select a preset EQ
Press and hold
SEL
EQ
once or more to select CINEMA, ROCK CLASSIC, FLAT, or
EQ OFF.
Set clock
1. Press
SEL
EQ
on the front panel once or more (or press and hold
CLOCK
on the
remote control) to enter clock setup mode.
2. Rotate the
VOLUME -/+
knob
to adjust the hour.
3. Press
/
to enter minute setting.
4. Rotate the
VOLUME -/+
knob
to adjust the minute.
The time on the clock is set automatically after a few seconds of inactivity.
Set alarm
Press and hold
once or more to enter alarm clock and source settings.
Repeat the operations in clock setting to set the alarm.
Two alarm sources are available for selection: TUNER and USB.
Turn alarm on/off
Press
to turn on or off the set alarm.
When the alarm is set, the
icon will stay on the LCD.
Adjust brightness
Press
once or more to select a brightness level for the front panel: LOW,
MIDDLE or HIGH.
Select speakers
Press and hold
ZONE 1, ZONE 2
or
ZONE 3
to select speaker output. The
corresponding zone number will be displayed on the LCD once selected.
Reset
Press
RESET
with a sharp object to reset the unit and load its factory default
settings.
English
