6
Safety Warnings
HOW TO HANDLE THE LED PANEL
●
Do not press hard or jolt the LED panel. It may
cause the LED panel glass to break and injury
may occur.
●
If the LED panel is broken, make absolutely sure
that you do not touch the liquid in the panel.
This may cause skin inflammation.
●
If the liquid gets in your mouth, immediately
rinse and consult with your doctor. Also, if the
liquid gets in your eyes or touches your skin,
consult your doctor after rinsing for at least 15
minutes in clean water.
Possible Adverse Effects on LED Panel:
If
a fixed image displays on the TV screen for a
long period of time, it may cause a permanent
disfigurement on the screen with image burn-in or
ghosting. This type of damage is NOT COVERED
BY THE WARRANTY.
●
Avoid displaying a static picture or a picture
with static elements (black bars, black borders,
logos, etc.) on the TV screen for more than
two hours at a time. Make sure you change the
image on your screen periodically.
●
If the aspect ratio of the TV is set to 4:3 for a
long period of time, image burn may occur on
the letterboxed area of the screen. Make sure
you change the size of the picture occasionally.
The following symptoms are not signs of
malfunction but technical limitation. Therefore
we disclaim any responsibility for these
symptoms.
●
LED panels are manufactured using an
extremely high level of precision technology,
however sometimes parts of the screen may
be missing picture elements or have luminous
spots. This is not a sign of a malfunction.
●
Do not install the LED panel near electronic
equipment that produces electromagnetic
waves. Some equipment placed too close to
LED may cause interference.
●
Effect on infrared devices – There may be
interference while using infrared devices such
as infrared cordless headphones.
COMPLIANCE
FCC Statement
Note:
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment
and receiver.
●
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
●
Consult the dealer or an experienced radio/TV
technician for help.
WARNING:
Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate this equipment under FCC Rules.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1.
This device may not cause harmful
interference.
2.
This device must accept any interference
received, including interference that may
cause undesired operation.
POWER SOURCE
This TV is designed to operate on 100~240 volt
50/60 Hz, AC current. Connect the power cord
to a GFCI protected AC outlet with an “in-use”
waterproof cover.
Warning:
TV and GFCI receptacle must be
installed away from any water source in a safety
distance. Be sure to check local electrical codes
and comply with their local standards.
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
