Furrion 2021132274 User Manual Download Page 12

Installation and Replacement of the 
Battery of Remote Controller

1.

Open the battery cover: hold the handle of the battery
cover,gently pull it up, and remove the battery cover.

2. Put in the battery (AAA): pay attention to the polarity

of battery, which should be consistent with the
identifications in the battery box.

3. Install the battery cover.
4. Inspection: if there is no display on the display screen of

remote controller after pressing the button “ ”, please
reinstall the battery.

Display of the Display 
Board of Decorative Panel 
and Function Description:

Temperature and
error code display

Power light

Compressor operation
indicator light

LED strip indicator light

Temperature and error code display: 

used to set the 

display of temperature, room temperature and error code. 

Power light:

 when the machine is started up, the power 

light will be on. When it’s shut down, the power light will go 
out. 

Compressor operation indicator light:

 it will be on 

when the compressor is turned on, and go out when the 
compressor is turned off.

Urgency ON/OFF button:

 it’s on the display board,used to 

start up/shut down the machine urgently when the remote 
controller is lost.

Urgency ON/OFF
button

MAINTENANCE OF AIR CONDITIONER

Cleaning of Filter Screen

Position of left and right buckles of the decorative panel 
Regularly remove the filter screen behind the decorative 
panel inside the panel (press the left and right buckles of the 
decorative panel, and the decorative panel can be removed), 
flush it backwards with clear water, dry it and reinstall it.

NOTE: 

It is forbidden to operate the air conditioner without 

the filter screen, otherwise, the evaporator coil will be defiled 
and the service life of air conditioner will be affected.

Panel Surface Cleaning

Clean the outer surface of the panel with soft cloth dipped in 
neutral detergent. Do not use polishing or cleaning powder.

Fan Motor

The fan motor has been lubricated before leaving the factory 
and does not need special maintenance.

Position of left and
right buckles of
the decorative
panel

Filter screen

Decorative panel

Head direction of the RV

Display Board

English

Rev: 06-30-22

 

- 11 -

CCD-0005745 

Summary of Contents for 2021132274



















Reviews: