ASSEMBLY INSTRUCTIONS
STEP 2: FIT TABLE TOP TO BASE
Please note this is a very heavy item and will require 2 reasonably strong people to pick up and
place into position.
With the help of another person or two remove top from carton. Ensure holes in bottom of top
(1) are facing towards the ground. With help of another person pick top up by the long edge 1
person each side, centre to balance top on base as per diagram, once top (1) is stable, from under
table line up holes between leg and top, move slowly as to not upset balance. Once lined up take
bolt [E] & washer insert into hole and by hand seat thread properly, turn 2-3 times, at this point do
not tighten, Repeat for all other bolts as per diagram 4 in total. Once all bolts are seated correctly
tighten using Allen keys (D) provided. Note do not overtighten just till firm. Assembly Complete
Warning never drag bench always lift FROM THE SIDE and with the help of another person.
Dragging can cause damage to product and or your floor surface.
5
Reverse Close up View
