ASSEMBLY INSTRUCTIONS
Hardware
③
x 4 pcs
Hardware
④
x 2 pcs
Page 7 of 11
I.
Insert the two long wood dowels
(#4) through Part #D until they
are centered. Then insert the
two Part #E onto each ends of
the long wood dowels (#4)
forming an “X”.
II.
Insert 2 short wood dowels (#3)
into Part #D and 1 each short
wood dowel (#3) into Part #E.
Applying glue to the wood dowel:
a). Remove one end of the dowel and
squeeze a drop of glue onto it. The glue
should cover the tip of the dowel. DO
NOT pour glue directly into the hole.
b). Insert the glued end of the dowel into
its appropriate location. Use a rag or a
paper towel to wipe any excess glue
oozing around the dowel.
c). Squeeze a drop of glue onto the end
of the dowel sticking out. The glue should
cover the tip of the dowel.
d). Insert this end of the dowel into the
other part. Use a rag or a paper towel to
wipe any excess glue oozing around the
dowel.
e). Both parts should now line up and
connected.
Hardware
①
x 4 pcs
Turn right (clockwise) to tighten
Summary of Contents for Perry Round Geometric Coffee Table YNJ-129-6
Page 3: ...Page 3 of 11...
Page 5: ...Page 5 of 11 CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS ly...
Page 6: ......
