ASSEMBLY INSTRUCTIONS
Hardware
⑧
x 4 pcs
Page 10 of 11
Center the glide (#8) on the bottom of the longer end of
Part #B and gently tap with the hammer until the glide is
secured all the way in. Repeat the process to assemble
the remaining glides (#8) onto Part #B.
Hardware
⑤
x 8 pcs
I.
This final step requires the assistant of
another person. Align the shorter end
of Part #B with the pre-drilled hole on
the ends of Part #D.
II.
Using the Allen wrench (#6), secure the
screw (#5) only enough to stabilize and
hold the two parts together. DO NOT
TIGHTEN YET. Repeat the process to
assemble the remaining shorter ends of
Part B onto Part #D and #E.
III. Have one person holding the
assembled Part #F to align with the pre-
drilled hole on the longer end of Part
#B.
IV. Using the Allen wrench (#6), secure the
screw (#5) only enough to stabilize and
hold the two parts together. DO NOT
TIGHTEN YET. Repeat the process to
assemble the remaining longer ends of
Part B onto Part #F and #G.
V.
Go back and fully tighten all 8 screws
(#5).
⑥
Ⓖ
Ⓓ
Ⓔ
Ⓔ
Ⓕ
Ⓖ
Turn right (clockwise) to tighten
Summary of Contents for Perry Round Geometric Coffee Table YNJ-129-6
Page 3: ...Page 3 of 11...
Page 5: ...Page 5 of 11 CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS ly...
Page 6: ......
