Furniture of America CM7056-CK, Assembly Instructions Manual

Page: 10 / 23

Turn right (clockwise) to tighten
Page 4 of 6
Enlarged
#C x 8 pcs
#D x 8 pcs
#E x 8 pcs
Due to the size and/or weight of this product, it is highly
recommended that the assembly should be done near the
area of its intended location. Make sure you have enough
space to move around during the assembly. ALWAYS have
at least two people to help with transporting and assembling
the product to avoid any potential injury and/or damage.
I. Align the feet (#5) onto the pre-drilled holes on the bottom corners
of the headboard (#1).
II. Prepare 4 bolt assemblies by inserting FIRST the lock washer
(#E) onto the bolt (#C) and then the flat washer (#D) onto the
SAME bolt (#C), in that order.
III. Insert the bolt assemblies through the holes of the feet (#5) and
secure those bolts using the Allen wrench (#H) to lock them in with
the headboard (#1).
IV. Repeat the process above to assemble the feet (#5) onto the
footboard (#3).