Furniture of America CM7009CK, Assembly Instructions Manual

Page: 8 / 30

Page 8 of 10
Turn right (clockwise) to tighten
I. Align the two center support legs (#5) with the pre-drilled holes underneath
the center support rail (#4).
II. Prepare two bolt assemblies by inserting FIRST the lock washer (#E) onto
the bolt (#B) and then the flat washer (#D) onto the SAME bolt (#B), in that
order.
III. Insert the bolt assemblies through the center support rail (#4) using the
Allen wrench (#H) to lock them with the two center support legs (#5).
#B x 2 pcs
#D x 2 pcs
#E x 2 pcs
I. Prepare 4 bolt assemblies by inserting FIRST the lock washer (#E) onto the
bolt (#A) and then the flat washer (#D) onto the SAME bolt (#A), in that order.
II. Insert 4 bolt assemblies into the pre-drilled holes of the headboard (#1) using
the Allen wrench (#H) but expose about ½” of the bolts’ threads.
III. Mount the brackets on the two side rails (#2) onto the bolts (#A). Make sure
the washers are in the front of the brackets. Use the Allen wrench (#H) to
tighten the bolts to secure the two side rails (#2) together with the headboard
(#1).
IV. Repeat the process above to assemble the other ends of the two side rails
(#2) onto the footboard (#3).
#A x 8 pcs
#D x 8 pcs
#E x 8 pcs
Turn right (clockwise) to tighten