Furniture of America CM7009CK, Assembly Instructions Manual

Page: 27 / 30

Page 7 of 10
Turn right (clockwise) to tighten
I. Align the two side rail legs (#9) with the pre-drilled holes
underneath the two side rails (#2).
II. Prepare 2 bolt assemblies by inserting FIRST the lock
washer (#E) onto the bolt (#C) and then the flat washer (#D)
onto the SAME bolt (#C), in that order.
III. Insert the bolt assemblies through the two side rail legs (#9)
using the Allen wrench (#H) to lock them with the two side
rails (#2).
X 2
Turn right (clockwise) to tighten
I. Align the threaded end of the
side rail support leg (#10) with
the pre-drilled hole on the
center of the side rail support
(#7) and tighten by hand until
secured.
II. Repeat the process above to
assemble the remaining two
side rail support legs (#10)
onto the two side rail supports
(#7).
#C x 2 pcs
#D x 2 pcs
#E x 2 pcs
X 3