Turn right (clockwise) to tighten
Page 5 of 5
#B x 8 pcs
#D x 8 pcs
#E x 8 pcs
I.
Align the 2 front legs (#1) with the pre-drilled holes on the corners
of the seat (#2).
II.
Prepare 4 bolt assemblies by inserting FIRST the lock washer
(#E) onto the bolt (#B) and then the flat washer (#D) onto the
SAME bolt (#B), in that order.
III. Insert the bolt assemblies through the pre-drilled holes in the
corners of the seat (#2) and secure those bolts using the Allen
wrench (#F) to lock them with the two front legs (#1).
Carefully place the completed chair upright.
Make sure the chair is rested on a flat surface
and does not feel loose or wobbly. If it does,
double check that the bolts/screws are
secured and properly tightened.
X 2
ASSEMBLY IS COMPLETED
X 2
