I.
Place the backrest with legs (#3) on a protected surface. Align
the seat (#2) with the pre-drilled holes of the backrest with legs
(#3).
II.
Prepare a bolt assembly by inserting FIRST the lock washer
(#E) onto the bolt (#A) and then the flat washer (#D) onto the
SAME bolt (#A), in that order.
III.
Insert the bolt assembly through the pre-drilled hole on the
center of the seat (#2) and secure that bolt using the Allen
wrench (#F) to lock it with the backrest with legs (#3).
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 4 of 5
#A x 2 pcs
#D x 2 pcs
#E x 2 pcs
#C x 8 pcs
#D x 8 pcs
#E x 8 pcs
I.
Prepare 4 bolt assemblies by inserting FIRST the lock washer
(#E) onto the bolt (#C) and then the flat washer (#D) onto the
SAME bolt (#C), in that order.
II.
Insert the bolt assemblies through the pre-drilled holes in the
corners of the seat (#2) and secure those bolts using the Allen
wrench (#F) to lock them with the backrest with legs (#3).
X 2
X 2
