Step 3
I.
Align the left front leg (#3) with the
two pre-drilled holes of the seat
frame with cushion (#2).
II.
Prepare 2 bolt assemblies by
inserting FIRST the lock washer
(#B) onto the bolt (#D) and then
the flat washer (#A) onto the
SAME bolt (#D), in that order.
III.
Insert 2 bolt assemblies through
the two pre-drilled holes in the
corner of the seat frame with
cushion (#2) and secure those
bolts using the Allen wrench (#F) to
lock it in with the left front leg (#3).
IV. Repeat the process above for the
right front leg (#4).
Step 4
Turn right (clockwise) to tighten
Page 5 of 5
#A x 4 pcs
#B x 4 pcs
#D x 4 pcs
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR
#2
Note: Right and left is determined by standing in FRONT of the chair
in its upright position.
Enlarged
6 Locations
I.
Insert the front leg support (#5) between the left
front leg (#3) and the right front leg (#4). Attach
those parts together with two wood screws (#G)
using a Phillips screwdriver to lock in the front leg
support (#5) with the left front leg (#3) AND the right
front leg (#4).
II.
Insert the left leg support (#6) between the backrest
with legs (#1) and the left front leg (#3). Attach
those parts together with two wood screws (#G)
using a Phillips screwdriver to lock in the left leg
support (#6) with the backrest with legs (#1) AND
the left front leg (#3).
III.
Repeat process II for the right leg support (#7).
IV. Carefully turn the completed chair upright. Make
sure the chair is rested on a flat surface and it does
not feel loose or wobbly. If it does, double check
that the bolts are secured and properly tighten.
#1
Turn right (clockwise) to tighten
Enlarged
Summary of Contents for CM3318PC-2PK
Page 2: ...Page 2 of 5 ...
