Step 1
I.
Place the backrest with legs (#1) on a protected surface.
II.
Align the seat frame with cushion (#2) with the pre-drilled holes of
the backrest with legs (#1).
III.
Prepare 2 bolt assemblies by inserting FIRST the lock washer (#B)
onto the bolt (#C) and then the flat washer (#A) onto the SAME bolt
(#C), in that order.
IV.
Insert the bolt assemblies through the two pre-drilled holes of the
seat frame with cushion (#2) and secure those bolts using the Allen
wrench (#F) to lock it in with the backrest with legs (#1).
Step 2
Turn right (clockwise) to tighten
Enlarged
Page 4 of 5
#A x 2 pcs
#B x 2 pcs
#C x 2 pcs
I.
Prepare 4 bolt assemblies by inserting FIRST the lock
washer (#B) onto the bolt (#E) and then the flat washer (#A)
onto the SAME bolt (#E), in that order.
II.
Insert 2 bolt assemblies through the two pre-drilled holes in
the corner of the seat frame with cushion (#2) and secure
those bolts using the Allen wrench (#F) to lock it in with the
backrest with legs (#1). Repeat for the other side.
#A x 4 pcs
#B x 4 pcs
#E x 4 pcs
Enlarged
Turn right (clockwise) to tighten
Summary of Contents for CM3318PC-2PK
Page 2: ...Page 2 of 5 ...
