3. Lay the
Head end
base flat on the
floor and fix the first
two stiletto legs
using four of the M8-30mm screws.
4. Once you have placed the
Foot end
flat
on the floor with the
Head end base
, fix
the other two
stiletto legs
using four of the
M8-30mm screws as in previous step.
5. With the legs in place, un-screw the
two screws and washers from the two fabric
clad blocks
(just so that these can move
freely
).
Make a slight cut across the
holes to make placement of
these screws easier
6 . Remove the two screws that sit
opposite, and place to one side.
FIXING-POZIPAN-M8X30 = X8
