Features
Overview of the most important functions of FAC 940/FAC 940L:
•
Electronic exposure control (SCS/AGC/lens control)
•
In the case of FAC 940L with integrated picture store for increased light sensitivity by
means of low-speed shutter; in addition
Picture storage functions (max. of 8 stored pictures)
•
Connection options for the usual lens types (auto iris lens, kangaroo lens, galvanometer
lens, ER lens)
•
Backlight compensation (BLC)
•
Automatic white balance
•
Automatic black level control
•
External synchronization with genlock signal or line lock
•
Remote control interface (RS-485) for configuration and operation
•
Hardware control inputs/outputs with various programmable options
•
Wide supply voltage range
•
Electrical isolation of power supply, video GND and chassis
•
EMC fine protection
•
Compatible with existing Funkwerk systems
•
Extended infrared sensitivity (FAC 940L-IR only)
•
Pixel error correction
The camera can be damaged or put out of commission completely if it is
•
used for purposes other than those specified
•
subjected to extreme shocks or vibrations
•
operated outside the ranges specified in the technical data
•
operated in a radioactive environment
•
directed towards sources of strong light (the sun) with the iris open, regardless whether
the camera is on or off
•
installed, serviced, configured or repaired by unauthorized persons with insufficient
training
The camera housing warms up considerably in comparison with the environment when in
operation.
Always ensure that a lens or protective dust cap is fitted so that no dust particles can enter the
camera, which will later become visible in the picture when the camera is started up.
Startup
Before you start up the FAC 940, you must first mount the selected lens and install the cabling
in accordance with the requirements at the place of installation.
Terminals and operating elements (Fig. 1)
All the terminals and configuration elements are located at the rear of the camera housing (1).
The following elements are configured:
(2) CVBS video output (BNC
(3) 15-pin system connector with
Asymmetrical CVBS signal output
Symmetrical CVBS signal output or
17
FAC 940
Summary of Contents for FAC 940
Page 23: ...23 FAC 940 ...
Page 24: ...FAC 940 ...
