Funkwerk elmeg t444, Operating Instructions Manual, Page: 38 / 84

Connecting (ECT)
During an ongoing call, you have the option of accepting a further call, or of initiating a second call yourself. The first party is put on hold du-
ring the inquiry call. You can then connect both parties with one another and you will be disconnected (from that call).
In the Professional Configurator you can define for each subscriber separately whether an external party is to be put on hold in the PABX or
in the exchange.
Transfer within the PABX
The feature »Hold in the PABX« must be configured.
The two external callers will be connected via the PABX. Your PABX is not available for other external calls while an external, transferred call
is in progress.
Transfer in the exchange
The feature »Hold in the exchange« must be configured.
The two external callers will be connected in the exchange. Your PABX remains fully available (for two connections) while the transferred
call is in progress.
You can only utilize this function if the feature »ECT« has been activated for your ISDN connection. Ask your network service provider for
details.
Connecting
Please note that ISDN terminal devices can only utilize the feature »Connect« via a special key or menu function. The following procedure
applies only to analog telephones.
g
You are conducting a call with party 1.
A further call is signaled, for example by call waiting.
R2
Dial this code.
Party 2 answers; you can speak with Party 2. and Party 1 is put on hold.
R4
You would like to connect the two parties with one another.
Dial this code.
Thetwopartiesarethenconnected.Thechargesfortheconnectionarebilledtothepartywhoestablishedtheconnection.
Connecting a waiting subscriber with several subscribers on hold
You have the option of putting several connections on hold and using a further connection (inquiry call connection) to transfer a party on
hold. You can utilize this feature with a system telephone or with an ISDN telephone that support this function (refer to operating instruc-
tions for terminal device involved).
Broker`s call
The broker's call feature allows you to switch back and forth between internal or external callers. The party that is on hold will hear the music
on hold (when programmed). With analog telephones you can switch between two callers. You can terminate each specific call. During sys-
tem configuration you can define whether the callers are to be put on hold in your PABX or in the exchange.
You are conducting a call and wish to speak to a further party, without the first caller being able to hear your conversation with the second
caller.
R
Press the R key.
You will hear the internal dial tone.
t
If you wish to speak to an external party, dial 0 first.
Dial the number of the party you wish to call.
You will hear the ringing signal in your handset.
The party will be called.
The party being called lifts up the handset of his/her phone.
g
You are conducting the call.
The first call is put on hold.
Conducting calls with several subscribers
34