Funkwerk elmeg t444, Operating Instructions Manual, Page: 14 / 84

Making Calls
Some terminal devices use their own special procedures for the functions described in the following. Refer to the operating instructions for
the terminal device being used for detailed information.
Only telephone connections, i. e. calls between subscribers, are presented in the following usage procedures as examples. For analog tele-
phones, these functions are only described for tone dialing terminal devices equipped with a flash key. The tones and signals described be-
low are heard when using analog telephones. These tones may be different for ISDN telephones and analog telephones which generate their
own dial tones. Other information may also be shown in the display of these telephones.
Direct exchange line access
The individual users of the PABX can configure activation of direct exchange line access or dialing calls using a prefix digit. When direct ex-
change line access is activated, you will be switched immediately to the external ISDN connection when you lift the handset and will then he-
ar the dial tone for the exchange. You can then begin dialing the external number at once.
If you deactivate direct exchange line access you must dial a prefix (LAD) when you make an external call.You will hear the internal dial tone
when you lift up your handset.
If your phone is set for »Automatic line access« you must first press the
*
key when you lift the handset
b
before be-
ginning any internal call procedures. The symbol
b
is highlighted in color, as shown in the example below, for the
corresponding performance feature.
b t g
Lift up
handset
Making internal calls Conduct your call
Calls
Accepting calls
l b g a
Telephone
rings
Lift up
handset
Conversation Replace
handset
Accepting a call (Pick-up)
An external call is signaled at a different in-house telephone.
You can now create different pick-up groups of subscribers for whom pick-up (accepting) of calls is possible. A call can only be accepted by
subscribers/terminal devices of the same pick-up group. Assignment of subscribers to pick-up groups can be made regardless of the settings
for the Day/Night team call assignments.
However, picking up a call is possible only within the pick-up group to which your terminal device has been assigned
via PC configuration. In the initial state all terminal devices are assigned to pick-up group 00 so that calls can be ac-
cepted from any telephone.
A telephone near you begins ringing. You would like to accept the call at your own phone.
b *0 g
Lift up
handset
Accept call Conversation
Making Calls
10