Funkwerk elmeg t444, Operating Instructions Manual, Page: 36 / 84

Conducting calls with several subscribers
While you are conducting a call you can
·
call a further party (inquiry call).
·
accept a second call during an ongoing call (call waiting).
·
transfer a call.
·
Transfer in the network (ECT).
·
connect a waiting caller.
·
conduct two calls at once while switching between the calls (broker's call).
·
talk to two parties simultaneously (three-party conference call).
If you wish to utilize these functions at an external point-to-multipoint connection, you must apply for them. Ask your network service pro-
vider for details.
The following sequences and codes apply to the use of analog telephones. ISDN telephones have their own (dedica-
ted) procedures. Consult the operating instructions for your terminal devices for further information.
Inquiry call
You can call another party at any time during an ongoing call.
g
You are conducting a call.
You would like to call another party.
R
Press the R key.
You will hear the internal dial tone.
t
If you wish to speak to an external party, dial 0 first.
Ifyouhear abusysignalafter dialing0,either yourtelephone does not haveproper authorization for anexternal call,or the
line is busy.
t
Dial the number of the party you wish to call.
You will hear the ringing signal in your handset.
The party will be called.
The party being called lifts up the handset of his/her phone.
g
Conduct your call.
To end the inquiry call press the Disconnect key on your ISDN phone.
or
R1
With analog terminal devices you must first dial the code
R1
the current call is then canceled and you are re-connected
with the first party.
g
Continue with your call.
Call waiting
During an ongoing call you can accept, or refuse, a waiting call at any time.
Call waiting is possible, however, for internal and external calls to analog telephones.
Conducting calls with several subscribers
32