background image

Declaration of conformity and CE mark

This device meets the requirements of the following EC directive R&TTE 1999/5/EG:

»Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio
equipment and telecommunications terminal equipment and the mutual recognition of their con-
formity«.

You can also request this EC declaration of conformity at the following Internet URL:
http://www.funkwerk-ec.com.

The waste container symbol with the "X" through it on the device indicates that the device must be disposed of sepa-

rately from normal domestic waste at an appropriate waste disposal facility at the end of its useful
service life.

© 2009 Funkwerk Enterprise Communications gmbH

- All rights reserved.

Reprinting of this document, even excerpts, is permitted only with the express consent of the publisher and with pre-
cise source information, regardless of the media used (mechanical or electronic).

Function descriptions included in this documentation which refer to software products of other manufacturers are
based on the software used and valid at the date the documentation was prepared or published. The product and
company names used in this documentation may be protected by trademarks.

Declaration of conformity and CE mark

2

Summary of Contents for elmeg DECT 300 Series

























Reviews: