You can also activate the automatic key lock feature during profile programming. The key lock activates automati-
cally 60 second after the last key was pressed.
Deactivate the keypad lock by pressing the menu key and then the asterisk key again.
Shortcuts
Some of the features of the handset can be activated / deactivated more rapidly using key combinations than with the
corresponding menu.
Mute
des Anruftones:
Menu key, rhombus key
(display shows: »
mute
«)
Key lock:
Menu key, asterisk key
(menu shows: »
Key lock
«)
Troubleshooting
Possible error
Causes/ Remedy
handset blocked.
Remove battery pack and re-install. Press the handset key for
restart.
handset does not ring.
Check the programming for the settings.
System ID not transferred to handset on log-in.
Check to ensure that the system is in the programming mode.
Keys do not respond.
Check whetherecall flash button blocking is activated.
Call channels permanently busy,
radio signal flashes.
Contact your specialized dealer.
handset can not be switched on.
Check to ensure that battery is connected properly.
Check charging level of battery.
Features with elmeg PABX Systems
If your elmeg DECT300 / 400 System is connected to an elmeg ICT PABX system you can utilize the following features
throughout the system. The description of the menu and the features which are available to you in this menu are gi-
ven in the operating instructions for your PABX system.
Using the system menu for the PABX (DECT400)
The DECT400 system is designed for being connected to elmeg ICT pabx systems. These devices provide a special
menu with further system-specific functions. This menu and the features that it contains are managed entirely in the
PABX.
Accessing the system menu
M
Press the menu key.
ˆ Profile
ˆ Setting
>
Use the arrow keys to select the »
ELMEG
« menu
(1x to the right).
ˆ Menu
ˆ ELMEG
Shortcuts
15
