- 10 -
mbosv_eng (25.02.2014)
mbosv_eng (25.02.2014)
- 11 -
adress area. In the appearing input screen (see image below) the first three numbers of
the IP address must be chosen analogously to the Major's address. As each IP may only
appear once in a given network, the fourth number must be different from the Major's (0-
254,
not 181
). The subnet mask is set to 255.255.255.0 as for the Major. Confirm your
input with "Add" and close all previously opened screens with "OK" or "Close".
In case the first 3 numbers of your PC's standard IP address are already 192.168.16, you
can skip the previous steps, but you have to take care that no other device with the IP
181 (4th number) is connected to the network during configuration. In more sophisticated
network architectures the range 192.168.16 could also be already used in another network
segment.
This kind of problems can be completely avoided if Major and PC are connected to a to a
separate network hub or switch, which is solely used for that purpose.
Example Configurations
of Funktronic devices in different network architectures can be
found in the
manual: "Ethernet Connections"
.
The Web Interface
Currently, the Web Interface is only available in German, but the following pages should
simplify its use.
To start the Web Interface, open a HTML browser (e.g. Mozilla Firefox, Internet Explorer)
and enter the Major's IP: (ex factory:) 192.168.16.181
You are prompted for authentification. Factory defaults are:
User Name (Benutzername):
mbosv
Passwort:
radio
The
main menu in the title bar
(see image on next page) contains the items "System",
"Applikation", "Reboot" and "Update". The
System pages
mainly contain the network
configuration and the possibility to change the authentification information. All further
paramaters are configured on the
Application pages
. The button
Reboot
executes a
restart, including a reset to factory defaults if desired. The button
Update
can be used to
update the network component's software.
Additionally the title bar shows some basic data of the device and the software.
