- 14 -
mbosv_eng (25.02.2014)
mbosv_eng (25.02.2014)
- 15 -
Funktion der Eingänge / Funktion der Ausgänge
The possible functions of inputs and outputs can be freely assigned to the respective pins.
For PTT inputs, the assignment to the desired microphones is also made here.
Eingangsverstärkung / Ausgangsverstärkung
If necessary, the different AF input and output levels can be adjusted here.
Mikrofonausgabepegel / Ausgabepegel Ruf
The output levels of the microphone and of call 1/2 can also be adjusted separately for
the different AF directions.
Application page 2
contains the
channel-specific parameters
as well as the
volume
settings
.
Using "+" / "-" you can browse through the different radio channels.
For each channel
the following parameters can be altered:
Funkkreiszusstand speichern
Remember the last channel selection status for the next power-on.
Funkkreis beim Einschalten
Channel is always on or always off at power-on (overwrites the previous setting).
Lautsprecherzustand speichern
Remember the last channel selection status for the next power-on.
Lautsprecherzustand beim Einschalten
Loudspeaker is always on or always off at power-on (overwrites the previous setting).
Lautstärke speichern
Remember the last volume setting for the next power-on.
Lautstärke beim Einschalten
Set defined volume level at power-on (overwrites the previous setting).
The following
Parameters
can be altered separately
for each AF direction (hand set,
headset, Loudspeaker 1, Loudspeaker 2, tape output, S/E output)
:
Min. Lautstärke
Lowest volume level, that is possible.
Max. Lautstärke
Highest volume level, that is possible.
Max. Lautstärke Kreis aus
Highest volume level, if the channel is not selected.
Max. Lautstärke Kreis an
Highest volume level, if the channel is selected.
Max. Lautstärke Sender aus
Highest volume level, if the transmitter is off.
Max. Lautstärke Sender anderer Kreis an
Highest volume level, if the transmitter of another channel is on.
Max. Lautstärke LS aus
Highest volume level, if the loudspeaker is off.
Max. Lautstärke LS an
Highest volume level, if the loudspeaker is on.
