ft636 (14.10.2013)
- 32 -
Kompetent für Elektroniksysteme
ft636 (14.10.2013)
- 33 -
Kompetent für Elektroniksysteme
Connection via the internet (DSL)
Major 5a control head
IP Interface
Ethernet
switch
DSL-Router
IP Interface
Ethernet
switch
Two-way radio
DSL-Router
DSL-Splitter
DSL-Splitter
Connection via the internet
This configuration shows the possible components when connecting with the internet. The ethernet
switches may or may not be available according to the requirements of the network. If not available
the IP Interfaces will be directly connected with their DSL-router. This should be the standard case
in order to ensure that no other devices (PCs) also use the internet connection. Also the connec-
tion speed is then completely available for the FT636 IP Interfaces.
The following upload rates are valid when the IP Interface is the only user of the connection.
-
-1-radio circuit:
min. 96kBit/s
- 2-radio circuit:
min. 160kBit/s
ATTENTION: Most of the time DSL providers only specify the download rate. The connec-
tion speed in the upload direction usually is significantly lower (for example: download
1000kBit/sec and upload 128kBit/sec).
ATTENTION: The IP Interfaces only work with a DSL router but not with a DSL modem.
ATTENTION: The FT636 IP Interfaces work either with an IP address set by the DSL provider
or with Dyn-DNS with dynamically assigned IP address at the DSL connection.
Summary of Contents for FT 636
Page 1: ...IP Interface FT 636...
