III. Installation and Attention:
Fill Water
Make sure the power if off. Twist off and take out the upper body,
then fill water into the transparent tank. Make sure to fill water
no higher than the “H” level and no lower than the “L” level
marked outside the tank. Then twist on the upper body and set it
in right place.
Attention: The water-washing system won’t work if no
enough water be filled, so please add water higher than the
“L” level before turning on the machine.
Drain and Clean
Please change the water in time when it hasn’t been used for a
long time or is contaminated. The steps are as below:
ⅰ
Turn off the power and unplug the machine.
ⅱ
Twist off and take out the upper body.
ⅲ
. Empty the dirty water inside the tank, and clean the tank. If
necessary, you may also add some detergent into the water for
cleaning purpose.
iv.
Replace all the cleaned parts back in the right position.
v. The machine needs cleaning every 3 months only.
Photo-catalyst filter
Water suction pipe
