27
26
RepRapBCN
User Manual
After selecting the piece to be printed, and having calibrated the machine and checked that everything works co-
rrectly, proceed as follows:
•
Make sure PLA is loaded in the machine
• Preheat the printer using the following commands in the LCD:
Home Menu > Prepare > Preheat PLA
• Once working temperature is reached,clean out excess material:
Home Menu > Prepare > Move axis > 1mm > Extruder
Turn the wheel clockwise until the material flows continously through the nozzle. Then clean out the extruded mate-
rial.
• Insert the SD card into the left side slot of the display screen, paying attention to the position of the card.
• Start printing by selecting the desired file:
Home Menu > Printfrom SD > Fila_name
The print process wil start. Attention should be paid to the manufacturing process, especially during the first uses.