21
20
RepRapBCN
User Manual
Repairment
In case the model needs to be repaired before printing, a warning sign will appear in the lower right corner. To repair it, select the
model and click on the tool
Repair
.
Next, in the right side window, click on Automatic Repair and select
Default Repair in the pop-up window. Click on Execute and then click on Apply Repair in the right side window to
finish the process.
In the new pop-up window, select Remove old part to erase the faulty original file. If the file is successfully repai-
red, the warning sign will be gone.
•
In case the model faces are inverted, the model will be shown in red. In this instance, the model can be repaired
clicking on Part/InvertPart.