11
EN
Picture Adjustment
The picture can be adjusted according to your personal
preferences. These settings are automatically stored after
exiting the picture menu.
1)
Press
PICTURE
, then press
Cursor
K
/
L
to select the
desired control “BRIGHTNESS”, “CONTRAST”,
“COLOUR”, “SHARPNESS” or “TINT”.
2)
Press
Cursor
s
/
B
to adjust to your desired level within 5
seconds.
3)
When done, press
PICTURE
to exit.
“TINT” appears only when receiving NTSC signals from an
additional device connected by either RGB scart jack or
AUDIO/VIDEO input jacks.
Note: •
In the above steps, the picture adjustment display will
disappear from the TV screen automatically after
about 60 seconds if you do not press any buttons.
Back Light Selection
1)
Press
SETUP
so that the menu display appears on the TV
screen.
2)
Press
Cursor
K
/
L
to point to “BACK LIGHT”.
3)
Press
ENTER
to select the mode you wish.
4)
When done, press
SETUP
to exit.
Status Display
To check the Channel number and Audio mode, press
DISPLAY
. Each time you press
DISPLAY
, TV screen will
change as illustrated:
When you select the channel using
the Number buttons
, select
the desired channel (position number).
Cursor
s
Cursor
B
BRIGHTNESS
to decrease
brightness
to increase
brightness
CONTRAST
to decrease contrast to increase contrast
COLOUR
to pale
to brilliant
SHARPNESS
to soft
to clear
TINT
to purple
to green
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
TINT
_
+
_
+
_
+
_
+
_
+
PICTURE
SETUP
BACK LIGHT [BRIGHT]
INITIAL
SETUP
BACK LIGHT [NORMAL]
INITIAL
SETUP
BACK LIGHT [DARK]
INITIAL
P08
STEREO
<OFF>
Press once
<CHANNEL NUMBER and AUDIO MODE>
L4670EA(EN).fm Page 11 Tuesday, May 15, 2007 5:36 PM
