8
EN
SET UP FOR USE
• Unless stated, all operations described are based on a remote
control use. Some operations can be carried out using the
buttons on the control panel.
• On-screen menu will disappear from the TV screen
automatically after about 60 seconds if you do not press any
buttons during the setting operation.
Language Selection
If you want to change the language of the on-screen menu, follow
the procedure below.
1)
Connect the power cord to a standard AC outlet.
Note: •
If some digits appear in the corner of the screen, press
STANDBY-ON
without unplugging the power cord.
2)
Press
STANDBY-ON
to turn on the TV.
3)
Press
SETUP
so that the menu display appears on the TV
screen.
4)
Press
Cursor
K
/
L
to point to “INITIAL”, then press
ENTER
.
5)
Press
Cursor
K
/
L
to point to “LANGUAGE”, then press
ENTER
.
6)
Press
Cursor
K
/
L
repeatedly to select your desired
language, then press
ENTER
.
7)
Press
SETUP
to exit.
Note: •
If you select
“
BACK
” in the screen menu and press
ENTER
,
the display will return to previous one.
Automatic Channel Presetting
You can programme the tuner to scan only the channels that you
can receive in your area.
1)
Press
STANDBY-ON
to turn on the TV.
2)
Press
SETUP
so that the menu display appears on the TV
screen.
3)
Press
Cursor
K
/
L
to point to “INITIAL”, then press
ENTER
.
4)
Press
Cursor
K
/
L
to point to “CHANNEL TUNING”,
then press
ENTER
.
5)
Press
Cursor
K
/
L
to point to “AUTO”, then press
ENTER
.
• The tuner scans and memorises all the active channels in your
area. When “AUTO TUNING” is completed, the lowest
memorised channel reappears on the screen, and you can use
PROG.
+/-
on the control panel or
/
(prog.)
on the
remote control for the memorised channels.
• If you press
SETUP
during the scanning, this operation will
stop and the lowest memorised channel will appear on the TV
screen.
SETUP
BRIGHT
AUTO
[ ]
[ ]
BACK
BACK
SELECT
OK
ENTER
PICTURE
BACK LIGHT
HDMI AUDIO
INITIAL
INITIAL
CHANNEL TUNING
LANGUAGE
BACK
BACK
BACK
SELECT
OK
ENTER
LANGUAGE
DEUTSCH
ENGLISH
ESPAÑOL
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
POLSKI
BACK
РУССКИЙ
BACK
BACK
SELECT
OK
ENTER
(Only for LCD-B2706 / LCD-B3206 / LCD-B2726)
Sorting of TV channels from P01 to P05 will be performed
automatically as follows.
P01 : BBC1
P04 : CH4
P02 : BBC2
P05 : CH5
P03 : ITV
SETUP
BRIGHT
AUTO
[ ]
[ ]
BACK
BACK
SELECT
OK
ENTER
PICTURE
BACK LIGHT
HDMI AUDIO
INITIAL
INITIAL
CHANNEL TUNING
LANGUAGE
BACK
BACK
BACK
SELECT
OK
ENTER
CHANNEL
BACK
BACK
SELECT
OK
ENTER
AUTO
MANUAL
MOVE
BACK
AUTO TUNING
START
FINISH
L5950EA(EN).fm Page 8 Friday, March 30, 2007 2:46 PM
