1-9-2
E1T12ER
Detailed Error Code table (vTuner – HTTP Status Code)
Detailed Error Code table (vTuner – Application Status Code)
Status Code
Description
201 Created
A new resource was created by this unit’s request.
202 Accepted
This unit’s request was accepted but its processing is not completed.
204 No Content
Though the server processed the request, there was no content.
304 Not Modified
This unit caches latest resource and the requested resource is not modified.
(exception protocol error)
400 Bad Request
The server cannot understand this unit’s request.
401 Unauthorized
The resource this unit has requested needs to be authorized.
403 Forbidden
The server has received the requests from this unit but refused to process
them.
404 Not Found
The URI this unit has requested is not found.
500 Internal Server Error
Internal server error occurred.
501 Not Implemented
The server does not support functionalities required to process the request
from this unit.
502 Bad Gateway
The proxy server between this unit and the server received an invalid reply
from another proxy or the original server.
503 Service Unavailable
Because of overloading or maintenance, the server is temporarily unavailable.
Status Code
Description
001 Nothing List
As a result of list creation process, there is no item to be displayed from the
received data.
002 LAN Disconnect
This unit’s LAN is disconnected.
005 Favorite Error
The URL needed to register or delete favorite data is not sent from the server.
601 Stream Stop
Because the streaming stopped, decoding has stopped. (This error message
is displayed if decoding is disabled for 20 seconds.)
602 Unsupported(Info)
The stream information of the broadcast is unsupported.
603 Decode Timeout
The unit tried to playback the received stream data, but the data was not
played correctly even after three minutes elapsed.
604 Unsupported(Stream)
As a result of analyzing the received stream data, the data is unsupported.
605 Decode Failed
The received stream data cannot be decoded.
606 Multi Stream
Because this unit received multiple streaming data, the data cannot be
decoded.
701 Protocol Error
An exception error occurred during communication between the server or the
broadcast.
702 Start Up Error
The application of this unit failed to start.
