19
In
itial Setups
EN
• Wait for several minutes to finish channel
storing.
After Auto Tuning has stopped:
• Use
[PROG.
/ ]
or
[the Number Buttons]
to
change the channel.
• When you use
[the Number Buttons]
, press
[0]
first for a single digit number.
• Use
[INPUT SELECT]
or
[PROG.
/ ]
to select
an external input channel (“AV1”, “AV2” or “AV3”) of
this unit.
To cancel auto tuning:
Press
[RETURN
R
]
during scanning.
Note
• The selection will be affected by how you receive TV
channels in your local area.
• If the auto tuning is cancelled during scanning,
some channels not yet tuned may not be received.
Manual Tuning
You can tune each channel and set their properties
manually.
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select “Initial Setting” using
[Cursor
/
], then press [ENTER].
3
Select “Channel Setting” using
[Cursor
/
], then press [ENTER].
4
Select “Manual Tuning” using
[Cursor
/
], then press [ENTER].
5
Select the position number of which
you want to change the setting using
[Cursor
/
], then press [ENTER].
• You can select position numbers 01 to 99.
• You can jump to the next or the previous page
using
[SKIP
F
]
or
[SKIP
B
]
.
6
Press [Cursor
/
] to start
searching for the available channel.
• Search direction can be switched by pressing
[Cursor
/
]
.
• If you already know the channel number, you
can directly enter the channel number using
[the Number buttons]
. Refer to the following
Channel Plan table and press the three digits to
select the channel number.
(To select channel 4, press
[0]
first and then
press
[0]
and
[4]
. Or press
[4]
. And when “4”
appears, wait for 2 seconds.)
• If this is the channel you want, press
[Cursor ]
.
Auto Tuning
Auto Tuning Now
Wait for a moment.
Auto Tuning Now
Wait for a moment.
10/04/06(Mon)
19:34
Setup Menu
10/04/06(Mon)
19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
Initial Setting
Clock Setting
TV Aspect
Select Video
Video Out
Channel Setting
10/04/06(Mon)
19:34
10/04/06(Mon)
19:34
Initial Setting
Clock Setting
TV Aspect
Select Video
Video Out
Channel Setting
Move
Move
Auto Tuning
Manual Tuning
10/04/06(Mon)
19:34
Manual Tuning
Pos.
Channel
Decoder
Skip
Station
P02
45
P03
63
P04
80
P05
88
P06
95
P01
21
P08
2
P07
110
Off
Off
Off
Off
Off
On
Off
Off
Off
Off
Off
Off
Off
Off
On
Off
---
---
---
---
---
BBC
---
---
E2B21BD_E2B28BD_EN.book Page 19 Monday, August 21, 2006 5:05 PM
