Cannot tune in radio
•
Make sure antennas are securely connected. Adjust the antennas
stations and connect an external antenna if necessary.
•
The signal strength of stations is too weak (when in Auto Scan
mode). Use manual tuning.
•
No stations have been preset or the preset stations have been
cleared. Preset the stations.
Remote does not function
•
Remove any obstacles between the remote control and the main unit.
•
Move closer to the system when operating the remote control.
•
Point the remote control directly at the sensor on the front panel.
•
Replace the batteries.
Disc is not played
•
Make sure there is a disc in the tray.
•
Close the disc cover. Make sure the playback side of the disc is
facing down on the disc tray.
•
The disc is skewed or warped.
•
The region code on the DVD does not match the system.
•
Moisture has condensed inside the system. Remove the disc and
leave the system turned on for about half an
hour.
Disc is not played
•
Program Play or Repeat Play is selected. To cancel Program Play
from the beginning before playing a disc, press PROGRAM button to display program
play list, select CLEAR button and press ENTER. To cancel Repeat
Play, press REPEAT button until you see "REP OFF" on the display.
•
Resume Play is active. Press STOP button twice and then restart
playing the disc.
Disc is played automatically
•
The DVD features an auto playback function.
Playback stops automatically
•
Some discs contain an auto pause signal. While playing such a disc,
the system stops playback at the auto pause signal.
Cannot perform certain func-
•
Depending on the disc, some operations may not be available. See
tions, such as Stop, GO TO, the documentation that came with the disc.
Slow Motion Play, Repeat
Play,or Program Play
26
