TV TYPE
DEFAULT
SYSTEM SETUP
TV SYSTEM
NTSC
PAL
AUTO
AUDIO LANG
SUBTITLE LANG
M ENU LANG
LANGUAGE SETUP
OSD LANGUAGE
ENGL ISH
GERM AN
SPANISH
FRENCH
Language Setup Page
This setup page enables you to select any of the
available languages for on-screen display (OSD),
system menus as well as subtitle and audio output
for discs. Language options include ENGLISH
(default), GERMAN, SPANISH and FRENCH.
OSD Language -
Language options for all
on-screen messages and system menus such as
program play lists, info menus and the setup menu.
Audio Language -
Only available when a
multi-language DVD is playing.
Subtitle Language -
Only available if the
DVD has more than one subtitles. Select "OFF" to
remove subtitle from the screen.
Menu Language -
Language options for
disc menus such as disc player menus and title
menus.
Setup Menu Overview
A f t e r t h e s y s t e m i s p r o p e r l y c o n n e c t e d , i t i s
important to customize the factory preset values for
your particular components and preferences. There
are 4 major categories in the setup menu.
1
LANGUAGE
Setup Page
2
VIDEO
Setup Page
3
SYSTEM
Setup Page
4
RATING
Setup Page
Setup Menu Navigation
The following keys are used to display and navigate
within the setup menu:
SETUP
Press to display and exit the Setup menu.
Press to move left/right for selection.
ENTER
Press to confirm selection in submenus.
Press to move up/down for selection.
15
Chapter 3 Setup
/
/
T o s e l e c t y o u r p r e f e r r e d l a n g u a g e f o r e a c h
language setting:
1. Press SETUP on the remote control.
2. Select the Language Setup icon.
3. Select one of OSD, AUDIO, SUBTITLE and
MENU LANG.
4. The language options (ENGLISH / GERMAN /
SPANISH / FRENCH) are displayed on the right.
Then select your desired language.
5. Press ENTER to confirm the selection.
Video Setup Page
T h i s s e t u p m e n u a l l o w s y o u t o s e t t h e v i d e o
interface to suit your TV system.
To set up your video interface:
1. Press SETUP on the remote control.
2. Select the Video Setup icon.
3. Select VIDEO.
4. Select CVBS or RGB.
5. Press ENTER to confirm the selection.
To turn on/off the SCART <RGB> output,
you may adjust the setting as below:
Select CVBS, then SCART will output
CVBS signal.
Select RGB, then SCART will output
RGB signal.
Select CVBS if you connect your TV to the
system with a S-video cable, and SCART
will output S-VIDEO signal normally.
System Setup Page
In this setup page, you can set the TV color system,
TV type (aspect ratio) and factory default setting.
Note
Note
VIDEO SETUP
VIDEO
CVBS
RGB
