Step 16
Install both Crossbars to the mounting plates on the Side and Center Legs,
adjusting the width to meet each plate.
It doesn’t matter which Crossbar end goes left or right, but you do want the center
screw plate facing up.
Once all screws are in place on both Crossbars, tighten them completely.
We find it easiest to start on each crossbar by part-
ly threading both of the uppermost Thick Machine
Screws into place. These upper screws then support
the weight of the crossbar while you partly thread the
bottom screws.
After all eight screws are in place, tighten them all the
way.
Pro Tip
N— Crossbar x2
X— Thick Machine Screw
x8
Top
Bottom
16
