Ref / Pt.No: 006944
Revolution II Stage 3 Installation
Instruction
Revision: C
Date: 27-Nov-12
006944.doc
Page 3 of 29
Important information - read this first
Before installing or operating the equipment, this manual and the appropriate operating
instructions must be read carefully.
The equipment must be used only for the application described.
Installation of the equipment must be carried out by skilled and authorized technicians
only.
Proper handling of the equipment is the basis for correct functioning.
Never remove any covers or parts off the system before the electrical power is
disconnected and isolated.
Do not wash the electronic equipment with volume washers or high pressure hoses.
It is the responsibility of the farmer to check his animals and the performance of the
equipment. If, for any reason, the system is not operational or individual animals refuse
to use the system, it is the responsibility of the farmer to make alternative arrangements
to feed and milk the animals.
To avoid injury to animals and equipment, check there are no projections (pipes or
anything similar) protruding in the parlour on which transponder neck bands or leg bands
can get caught.
Calibration of milk meters/monitors and feed dispensers are of utmost importance in
obtaining accurate milking and feeding results. If calibration is incorrect, or the wrong
values have been programmed, milking results and feed distribution will remain
adversely affected until calibration has been corrected.
The manufacturers guarantee does not cover direct or subsequent damage caused by
incorrect installation, incorrect usage, improper treatment, inadequate cleaning or
servicing, or incorrect software parameter inputs or hardware settings.
Incorrect operation of the milking or management system may seriously affect the
animals in an adverse way. It is therefore necessary to double check all inputs and
outputs of the system.
Icons
Icons are used in this manual to draw the read
er’s attention to specific information. These icons
have the following meaning:
Failure to follow the instructions can result in severe injury to engineers, users,
bystanders or livestock.
Indicates special precautions that must be taken to avoid damage to equipment.
Gives important information to prevent potential problems.
Gives advice or suggestions to make procedures easier or clearer.