- 3 -
1. INTRODUCTION
Thank you for choosing our series Pure sine wave inverter with charger . It is a perfect combination with a pure
sine wave inverter, bypass transfer part and 3 stage battery charger. When the public power failure, it converts
the battery’s DC to AC to support the electrical appliances’ work. When the public power on, it auto. switches to
use main AC power and then auto 3 stage charging (constant current, constant voltage, floating charge) for your
battery, the transfer time is less than 15ms no any influence to your AC appliances.
2. FEATURES
• Fully auto. protection functions: earth leakage protection, reverse polarity, overload, over voltage, over
temperature, Iow voltage, short circuit.
• Transfer time between bypass and inverter mode is less than 15ms, no any influence in your appliance’s working
when public power off.
• Three LED indicators: Power, Fault, Charger.
• Pure sine wave output: THD<3%
• AVS protection function: Iow voltage, over voltage, time delay.
• Inverter and charger remote control function optional.
3. OPERATION ENVIRONMENT
For best operating performance, the inverter should be placed on flat surface, such as ground or other solid
surface, install the inverter in a location that is:
•
DRY.
Do not allow water and/ or other liquids to come into contact with the inverter. In all marine applications, do
not install the inverter below or near the waterline and keep the inverter away from moisture or water.
•
COOL.
Ambient air temperature should be between 30 ºF (-1ºC) non-condensing, and 105 ºF (40 ºC). Do not
place the inverter on or near a heating vent or any pieces of equipment which is generating heat above room
temperature. Keep the inverter away from direct sunlight, if at all possible.
•
VENTILATED.
Keep the area surrounding the inverter clear to ensure free air circulation around the unit, do not
place items on or over the inverter during operation. A fan is helpful if the inverter is operating at maximum power
outputs far extended periods of time. The units will shut down if the internal temperature exceeds operating
temperature and restart after it cools.
•
SAFE.
Do not use the inverter near flammable materiaIs or in any locations that may accumulate flammable
fumes of gasses.
4. PRODUCT INDICATION
4.1 Product dimension
PDA-600SS-C
